12 Roof Repair Tips

Many small roof leaks can be found and stopped early, before they turn into ceiling stains, wet insulation, or mold. Here are 12 common trouble spots to check, what to look for, and when it’s time to call a professional.

1. Roof Age

Asphalt shingles wear out. Years of heating and cooling make them brittle, and sunlight breaks down the asphalt that holds them together. If your roof is near the end of its expected life and starts leaking, a replacement may make more sense than repeated patches.

2. Brick Chimneys

Mortar between chimney bricks is just sand, water, and cement, and it crumbles with weather exposure. Check the chimney cap and the mortar joints where the chimney meets the roof. Small mortar repairs are usually quick and inexpensive.

3. Flashing

Flashing is the thin metal that seals joints around chimneys, walls, and roof valleys. It has to be properly sealed and securely nailed, and even then it can rust or crack. Replacing worn flashing typically costs a few hundred dollars. Caulk and roof cement are only a stopgap if you plan to replace the roof soon.

4. Missing or Damaged Shingles

A shingle in the yard usually means water in the house at the next storm. To replace one, lift the shingles above it, pull the old nails, slide in the new shingle, and nail it down. Expect some color difference unless you have leftover shingles from the original roof. On a steep roof, call a contractor.

5. Vent Pipe Boots

Rubber or metal boots seal the spot where plumbing vent pipes pass through the roof. When the rubber cracks, cut away the old boot and install a new one. This is often a manageable do-it-yourself job.

6. Holes

Storms, falling branches, and animals such as squirrels and raccoons can create holes. Small holes can also come from misplaced nails and go unnoticed for years. Slip a small piece of flashing under the shingle rather than relying on a dab of caulk.

7. Complex Rooflines

Valleys, dormers, and changes in pitch are where water collects. These areas need a properly installed leak barrier, which is a job for a professional roofer.

8. Ice Dams

In snowy areas, heat from the attic melts snow that refreezes at the cold roof edge, forming a dam that traps water under the shingles. Clear the edges with a roof rake, or consider heated roof-edge cables or metal edge panels. Better attic insulation and ventilation help prevent ice dams in the first place.

9. Blocked Gutters

Clogged gutters send water back under the roof edge and toward your foundation. Clean them yourself with a ladder and gloves, or hire a gutter service, which typically costs $100 to $300 depending on the size of your home.

10. Skylights

Most skylight leaks come from flashing problems or poor installation, not the glass. Check for cracked flashing and damaged shingles around the skylight and for a dried-out rubber seal. A high-quality sealant can be a temporary fix ($50 to $300). Re-flashing typically runs $300 to $1,000, and full replacement $1,250 to $2,500.

11. Shiners (Missed Nails)

A nail that missed the rafter can frost over on cold nights, then melt and drip during the day, leaving brown spots on the ceiling. Clip it with side-cutting pliers. Shiners also signal that the attic needs better insulation and ventilation.

12. Attic Moisture and Ventilation

A damp, poorly ventilated attic shortens the life of the roof deck and encourages mold. Fixing insulation and ventilation protects the roof, reduces ice dams, and improves energy efficiency.

If a leak has already caused water damage inside your home, call CRBR. We provide 24/7 water extraction, drying, and roof repairs across Northern California and Reno, NV.

This article was written with the help of AI tools.